Radwin Ltd. 5XACMD3CN 用户手册
FinM Deployment Guide
Release 4.2.46
3‐29
Configuring Indoor Synchronization Units (ISUs)
Configuring the Radio Network
2. Remove the checkmark from First Installation, and enter the IP address of the unit
you wish to re‐configure. Note that the correct IP address of the Car Router will
appear.
appear.
Figure 3‐18: TMU ‐ Re‐configuration
3. Click OK. The Configurator will take all parameters as shown in the Configurator that
are relevant for a TMU and carry out the action as determined by the Download
software option you have selected (see
software option you have selected (see
Download software:
on page
3‐4
). If the
action includes downloading to a unit, it will download, via the Car Router whose IP
address is shown, to the unit whose IP address appears in the First Installation
window, regardless of which unit appears in the Car window.
address is shown, to the unit whose IP address appears in the First Installation
window, regardless of which unit appears in the Car window.
It may take about a minute to complete. You will receive one of the completion mes‐
sages described in
sages described in
3.6.3 Configuring Indoor Synchronization Units (ISUs)
Use this procedure to carry out changes in the configuration parameters of the ISUs. This
includes changing or setting its IP address.
includes changing or setting its IP address.
1. For a first‐time configuration, connect the ISU’s sync socket to your laptop or to a
LAN connection. Connect AC power to its power input. See
nection instructions.
For a re‐configuration of an ISU already installed in the field, you can rely on your
network’s connection.
network’s connection.
2. Open the Configurator.
3. From the Main tab, click the Line pull‐down menu and select the line on which the
).
4. From the Download Software pull‐down menu, select the appropriate
configuration option (see
page 3‐4
for a description of these options).
5. Click Configure Unit. The following window will appear:
For Regualtor Approval Only