ZTE Corporation RSU82C 用户手册
Chapter 5 Hardware Installation
5.2 Connecting RSU Monitoring Cable
Prerequisites
l
ZXSDR RSU82C RF cabinet has already been installed.
l
The RSU module has already been installed.
Context
The RSU monitoring cable of the RF cabinet is routed to the right side of the RF cabinet
in delivery, as shown in
. After the RSU module is installed, insert the terminal
of the RSU monitoring cable to the MON (monitoring) interface of the RSU module.
Figure 5-9 RSU Monitoring Cable
Note:
If multiple RSU modules need to be monitored, only one RSU module needs to be
connected to the RSU monitoring cable.
Steps
1.
Connect one end of the RSU monitoring cable to the MON (monitoring) interface of
the RSU module and fasten the screw.
2.
Bundle the RSU monitoring cable.
shows the connected RSU monitoring cable.
5-9
SJ-20101019140047-001(R1.2)|08/08/2011
ZTE Proprietary and Confidential