ZTE Corporation ZXHNH389A 用户手册
Interface/Button
Function
WAN
RJ-45 port. It is used to connect to the uplink ethernet
access network.
access network.
Reset
During power on period, hold on this button for more
than 5 s to reset the current settings to the factory
default setting, and then the system automatically
restarts.
than 5 s to reset the current settings to the factory
default setting, and then the system automatically
restarts.
Power
Power supply port. It is connected to the power
adapter.
adapter.
On/Off
Power switch. Power on or power off the device.
3.2 Hardware Connection
Figure 3-4 shows the devices that are connected to interfaces of the ZXHN
H389A
H389A
Figure 3-4 Cable Connection
After the devices are connected to the ZXHN H389A device, press the power
button. When the corresponding indicators on the front panel are On, you can
enjoy various services provided by the service provider.
button. When the corresponding indicators on the front panel are On, you can
enjoy various services provided by the service provider.