HCV Consulting 100001 用户手册
HCV Wireless Pty Ltd
Commercial – In Confidence
BlueMod User Guide v0.01.doc
P:\bluemod\doc\BlueMod User Guide v0.01.doc
Page 10 of 15
Connecting BlueMod™
to a PC Serial Port
The BlueMod™
I/O connector is a proprietary design pin-out.
Only the BlueMod™ Serial Adapter should be used when
connecting BlueMod™
connecting BlueMod™
to another device. See
Safety
To connect BlueMod™
to a PC Serial Port:
1.
Insert the IDC-10 socket on the BlueMod™
Serial Adapter into the
BlueMod™ I/O Port with the polarised bump facing up.
2.
Using a standard Null-Modem Serial cable, connect the BlueMod™
Serial Adapter to the Serial Port of a PC.
Advanced Features
BlueMod™ provides a number of more advanced functions such as a built-in boot
manager. For details, see the BlueMod™ Software Developers Guide on the Starter
Kit CD-ROM or visit
manager. For details, see the BlueMod™ Software Developers Guide on the Starter
Kit CD-ROM or visit
Testing Your BlueMod™
You can check that your BlueMod™ device is functioning properly by performing the
following test:
following test:
1.
Connect power to BlueMod™ as described above.
2.
Use another Bluetooth device such as a PC or mobile phone to
perform an enquiry and discover your BlueMod™ device.
perform an enquiry and discover your BlueMod™ device.
3.
Perform a service discovery on BlueMod™. LAN Access and a
Serial Port Profile service should appear in the list of available
services. This indicates that your BlueMod™ is functioning
correctly.
Serial Port Profile service should appear in the list of available
services. This indicates that your BlueMod™ is functioning
correctly.
You are now ready to start working with BlueMod™, or start developing your own
wireless solutions with BlueMod™. For further details, see the BlueMod™ Software
Developers Guide on the Starter Kit CD-ROM or visit
wireless solutions with BlueMod™. For further details, see the BlueMod™ Software
Developers Guide on the Starter Kit CD-ROM or visit
CAUTION!