HCV Consulting 100001 用户手册
HCV Wireless Pty Ltd
Commercial – In Confidence
BlueMod User Guide v0.01.doc
P:\bluemod\doc\BlueMod User Guide v0.01.doc
Page 9 of 15
GETTING STARTED WITH BLUEMOD™
BlueMod™
can be powered via its Plug Pack adapter or via a USB host, such as a
standard PC.
Powering BlueMod™
via the Plug Pack
To power BlueMod™
with the Plug Pack:
1. Insert the BlueMod™
Plug Pack into an AC wall socket. The Plug Pack can
accept input voltages between 110V and 240V AC.
1. Insert the 1.3mm plug into the BlueMod™ DC Power Jack.
2. Turn on the power at the wall socket.
3. Start BlueMod™
by pressing the Power On/Off Button for 1 second.
Powering BlueMod™
via a USB Host
To power BlueMod™
from a USB Host:
BlueMod™ should not be powered via the USB connector
when an Accessory Board is connected to the system. See
when an Accessory Board is connected to the system. See
1.
Remove any BlueMod™ Accessory Boards (see
below for instructions).
2.
Insert the Mini-B end of the BlueMod™
USB Cable into the BlueMod™
Mini-B
USB Connector.
1. Insert the Type A end of the BlueMod™
USB Cable into a USB host.
2. Start BlueMod™
by pressing the Power On/Off Button for 1 second.
CAUTION!