Redline Communications Inc. AN100UXA 用户手册
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 30 of 136
April 19, 2010
Table 13: System - Ethernet Data Port 100 LEDs
LED
Description
ON
LAN is operating at 100 Mbps.
OFF
LAN is operating at 10 Mbps.
Data Port FD/Col LED
The FD/Col LED lights green when the port is operating in Full Duplex mode. The LED
flashes when collisions are detected. There are always collisions occurring on a Half-
Duplex link.
flashes when collisions are detected. There are always collisions occurring on a Half-
Duplex link.
Table 14: System - Ethernet Data Port FD/Col LEDs
LED
Description
ON
Full duplex operation
FLASH
Packet collisions detected on the LAN
OFF
Half Duplex operation
Mgt Port
The Mgt port is used for out-of-band management and diagnostics. This port can be
enabled and disabled. The port can be programmed to operate in full duplex or half
duplex mode and at 10 Mbps or 100 Mbps.
enabled and disabled. The port can be programmed to operate in full duplex or half
duplex mode and at 10 Mbps or 100 Mbps.
Mgt Port LEDs
Mgt Port Link (Link/Act) LED
The Mgt port Link LED lights green when a link is established.
Table 15: System - Ethernet Mgt Port Link LEDs
LED
Description
ON
Ethernet interface is present.
FLASH
Ethernet interface is present and there is data activity.
OFF
Ethernet interface is not active.
Mgt Port Act (100) LED
The 100 LED lights solid green when the Mgt port is operating at 100 Mbps. The LED is
off when operating at 10 Mbps.
off when operating at 10 Mbps.
Table 16: System - Ethernet Mgt Port Act LEDs
LED
Description
ON
Ethernet interface is operating at 100 Mbps.
OFF
Ethernet interface is operating at 10 Mbps.