Redline Communications Inc. AN100UXA 用户手册
User
AN-100U/UX Base Station
Manual
70-00058-01-04
Proprietary Redline Communications © 2010
Page 69 of 136
April 19, 2010
4.4.3 Management Interface
Click
Management Interface
in the system menu (left side of screen) to view and edit
the IP address and DHCP settings.
Figure 31: Web: Configuration - Management Interface Screen
IP Parameters
Obtain IP Parameters from DHCP Server: Select this option to have the base station
obtain its IP address from a DHCP server.
obtain its IP address from a DHCP server.
Use the following IP Parameters: Manually enter the following IP parameters:
IP Address: Enter the static base station network IP address.
Subnet Mask: Enter the base station subnet address mask.
Default Gateway: Enter the IP address of the default gateway on the local Ethernet
segment.
segment.
Time Server (SNTP): Enter the IP address of the SNTP server.
Use the following checklist to ensure correct display options:
1. Time server must be compatible with SNTP (RFC-2030)
2. Ensure the time zone is correct for your area.
3. If you are in an area that observes daylight savings time, check the box.
Time Zone: Enter the time offset from GMT (hours:minutes).
Daylight Savings: Check to enable automatic time change for daylight savings.
Syslog Server: Enter the IP address of the Syslog server to enable this feature.
Refresh: Click
Refresh Time
to poll the time server for the current time.