Redline Communications Inc. AN50S 用户手册

 

 

AN-50 System User Manual 

Redline Communications 

 

…..solving the first mile challenge. 

 

 
 
 
ID Properties: 
 
ID: Select the channel ID to be configured, deleted or displayed for the system in which 
you are interested. In order to locate the proper ID number use the ID Browser described 
in section 8.3. 
 
 
ID Screen Buttons: 
 
Configure: Calls the Link Configuration screen (see section 8.2.1) for the selected ID. 
 
Delete: Deletes the selected ID. 
 
Statistics: Displays the Link / Connection Status screen (see section 8.2.2) for the 
selected ID. 
 
New ID: Adds a new ID by calling the Link Configuration screen (see section 8.2.1). 
 
Save IDs: Saves the entire ID table in Flash. 
 
Clear All IDs: Clears all IDs from the FLASH. Note: This process cannot be undone. 
 
 
 

 
This screen is displayed through the ID Config / Status screen by clicking the Config 
button. Please note that this screen will be active only on the AN-50 operating in PMP / 
PTP master mode.  The fields in the Link Configuration screen need to be filled out for 
each individual subscriber station. 
 

Page 33 of 76