Redline Communications Inc. AN80IA 用户手册
Red
CONNEX
TM
AN-80i
PMP
User Manual
70-00072-01-03
Proprietary Redline Communications © 2007
March 19, 2007
Page 12 of 60
Each wireless link requires two AN-80i units. One AN-80i is configured as the PTP
Master and controls the wireless link. This function is transparent to all Ethernet
operations. The master AN-80i uses a scheduled request/grant mechanism to arbitrate
requests for bandwidth from the remote unit -- providing non contention-based traffic
with predictable transmission characteristics. The second AN-80i operates as a PTP Slave
under control of the master unit.
Master and controls the wireless link. This function is transparent to all Ethernet
operations. The master AN-80i uses a scheduled request/grant mechanism to arbitrate
requests for bandwidth from the remote unit -- providing non contention-based traffic
with predictable transmission characteristics. The second AN-80i operates as a PTP Slave
under control of the master unit.
Figure 2: Intro - AN-80i with Integrated Antenna
2.1 Ethernet
Port
The AN-80i receives DC power and exchanges data with the indoor network through the
Ethernet port. The AN-80i Ethernet port connects to the PoE Adapter using a
weatherproof Cat. 5e Ethernet cable. The Ethernet port is a female RJ-45 connector.
Ethernet port. The AN-80i Ethernet port connects to the PoE Adapter using a
weatherproof Cat. 5e Ethernet cable. The Ethernet port is a female RJ-45 connector.
2.2 RF
Port
The RF port is used to send and receive RF signal to/from the antenna. A short coaxial
cable is provided to connect the transceiver to an external antenna. The RF port is a
female N-type connector.
cable is provided to connect the transceiver to an external antenna. The RF port is a
female N-type connector.
2.3 Mounting
Brackets
There are two mounting brackets available for the AN-80i. The lightweight (two-point)
antenna bracket provides convenient mounting of one-foot flat panel antennas. The
heavy-duty (four-point) antenna mounting bracket is available for mounting two-foot flat
panel and parabolic antennas.
antenna bracket provides convenient mounting of one-foot flat panel antennas. The
heavy-duty (four-point) antenna mounting bracket is available for mounting two-foot flat
panel and parabolic antennas.
2.4 Grounding
Connection
A ground-lug is provided on the AN-80i chassis. Use this connection to terminate a
grounding wire.
Important: Correct grounding is very important for safe operation of wireless
equipment. Ensure that all grounding connections are made in accordance with
local and national standards.
grounding wire.
Important: Correct grounding is very important for safe operation of wireless
equipment. Ensure that all grounding connections are made in accordance with
local and national standards.