Tagsys S.A. L200TUNANT500 用户手册
CONVEYOR TUNNEL READER User's Guide
26/45
Revision 1.0
November 2007
5 Installation
5.1 Conveyor Tunnel Reader
5.1.1 Installing
After having defined the location of the Conveyor Tunnel Reader, immobilize it by applying the
brakes on at least two of the four conveyor wheels.
brakes on at least two of the four conveyor wheels.
Conveyor elevation can be adjusted by acting on the feet position (2 screws on each foot).
Then, connect the power cable to the electrical terminal, and the plug the host PC to the serial port.
CAUTION:
This equipment is intended for indoor use only under the conditions described in
this document. Should it be used outside these conditions cannot be guaranteed, and is not
recommended. Please read
recommended. Please read
section 1
“
For Your Safety
“ before installation or use.