Renishaw plc RMI 用户手册

Set up is done by using the RMP trigger logic

and powering on the RMI at a particular time

during the process.

1.

Use trigger logic to set RMP turn on/ off

modes as desired.

2.

Use trigger logic to access RMP acquisition

mode (turquoise/light blue flashes 2 short

and 1 long).

RMP-RMI partnership

3.

Power on the RMI.

4.

Wait until RMI signal led flashes green.

When holding the RMP do NOT wrap a

hand, or anything else, around the glass

window.

5.

Trigger the probe (min 0.1 sec, max 2 sec).

6.

When the partnership is established the

RMI signal LED will flash red and yellow.

7.

Allow ~10 seconds for both RMP and RMI

to timeout, all RMP LEDs off, RMI signal

LED off. The system is then ready for use.

8.

Note: If the RMP flashes 2 turquoise short

followed by 1 red long it is still trying to

partner an RMI.

When the RMP and RMI become partners the

RMI records the RMP serial number. It is not

possible for an RMI to be partners with more than

one RMP.

It is possible for an RMP to be partners with more

than one RMI, but the system will not

work correctly if more than one partner RMI is

powered on at any one time.