Renishaw plc RMP60 用户手册

Appendix 1

Red

Error, other outputs may
be incorrect.

Off:

No Error.

Green

Full signal strength.

Yellow

Medium signal strength.

Red:

Low signal strength, radio

link may fail.

Off

No signal detected.

Green/off

Flashing: RMI is acquisition

mode, and can acquire a

partner RMP.

Red/yellow

Flashing: RMI has (just)

acquired a new partner RMP.

1.

The probe status LED will always be

illuminated when power is present, there

is no power present LED/light.

2.

All the indicators report the status of the

partner RMP. If there is no partner in range,

or the partner is off then the probe status

and  error LEDs will be red and the other

LEDs will be off.

3.

When the RMI is powered it will enter the

acquire partner mode which will be indicated

by the flashing. After a short time (~12 secs)

it will switch to its normal (passive) mode

listening for its partner.

4.

The conditions shown by the low battery,

probe status and error LEDs are the same

as those present on the electrical signal

outputs.