Renishaw plc RMP60V2 用户手册

Probe settings

The RMP60 probe can be in one of three modes:

Stand-by mode - The RMP60 is waiting for a

switch on signal.

Operating mode - Activated by one of the

switch on methods described on this page.

In this mode the RMP60 is now ready for use.

Configuration mode - The trigger logic

configuration method allows the following

settings to be configured.

The following switch on / switch off options

can be configured:

1. Radio on / Radio off

2.

Radio on / Timer off

3. Spin on / Spin off

4. Spin on / Timer off

5. Shank switch on / Shank switch off

The RMP60 will be switched on after 1 second

in all modes.

After being switched on, the RMP60 must be

on for 1 second minimum (7 seconds for spin

start) before being switched off.