Renishaw plc RMP60V2 用户手册

Diaphragm replacement

The probe mechanism is protected from coolant

and debris by two diaphragms. These provide

adequate protection under normal working

conditions.

The user should periodically check the outer

diaphragm for signs of damage. If this is evident,

replace the outer diaphragm.

The user must not remove the inner diaphragm.

If damaged, return the probe to your supplier.

1.

Remove the stylus.

2.

Undo the three M3 front cover screws and

remove the front cover.

3.

Inspect the outer diaphragm for damage.

4.

To remove the outer diaphragm, grip by the

outer edge and pull off.

5.

Inspect the inner diaphragm for damage.

DO NOT REMOVE THE INNER DIAPHRAGM

AS THE WARRANTY WILL BE VOID.