Gilbarco Inc. TCR 用户手册

Pr

el

imina

ry

To remove the existing Card Reader, proceed as follows:

Obtain an approval from the store manager or responsible personnel to remove the unit from 
service.

Remove AC power to the unit using the station circuit breaker. Refer to MDE-3893 Encore/
Eclipse Owners Manual for details.

Remove the lower hydraulics panel. The main door has a lower latch underneath the lower left 
main door corner. Open this latch. Locate the upper main door lock. Insert the main door key 
and open the main door.

Repeat step 

3 

for Side 2 of the unit.

Disconnect the cable harness or ribbon cable connection from the Card Reader (see 

on 

Remove the ESD Ground Connection cable from the current Card Reader (if it has one).

Use a 1/4 inch nut driver or 1/4 inch ratchet and socket to remove the two Hex head screws 
(see

 Figure 1

 on 

) that secure the Card Reader bracket (see 

 on 

) and the 

Card Reader to the option door. Dispose of the Card Reader and bracket, unless you want to 
keep the Card Reader as a used spare part.
Note: Make a note of the Card Reader’s gasket orientation. This information will be useful 

Remove the old Card Reader gasket from the option door. Use a putty knife, if required.