The CBORD Group Inc. VRC2100 用户手册
VRC2100 Vending Reader
11
Installation Guide
3.6 Controller Configuration
The VRC2100 vending reader controller is configured using two buttons
located on the side of the reader. Alternatively, the configuration settings
can be changed over the network using vrc2100Flasher.exe as described
in section 4 (Network-Based Configuration and Firmware Update).
located on the side of the reader. Alternatively, the configuration settings
can be changed over the network using vrc2100Flasher.exe as described
in section 4 (Network-Based Configuration and Firmware Update).
IMPORTANT:
It will be necessary to use the two buttons located on the
side of the reader to initially set up the controller. After initial setup, the
controller can be configured or updated using the VRC2100Flasher
Utility.
controller can be configured or updated using the VRC2100Flasher
Utility.
VRC2100 Vending Reader – Configuration Buttons