The CBORD Group Inc. VRC2100 用户手册
VRC2100 Vending Reader
10
Installation Guide
3.5 Configure the XPORT for CS Gold
Use the following procedure to configure the XPORT for CS Gold. Only
Telnet Configuration settings are required:
Telnet Configuration settings are required:
1. In the Lantronix Device Installer program, access the Telnet
Configuration tab. Once the XPORT connects to the Telnet session,
a blank page will appear. Click Connect and then quickly press the
[Enter] key when prompted with Press Enter for Setup Mode.
a blank page will appear. Click Connect and then quickly press the
[Enter] key when prompted with Press Enter for Setup Mode.
2. Select 0 Server and enter the following settings for CS Gold. The IP
address, Gateway IP address, and Netmask must be assigned by your
network administrator:
network administrator:
IP Address: Enter the IP address.
Set Gateway IP Address: Enter the Gateway IP address.
Netmask: Number of Bits for Host Part (0=default) (10)
Set DNS Server IP addr (N) ?
Change Telnet/Web Manager password (N) ?
3. Select 1 (Channel 1) and enter the following settings for CS Gold:
Baudrate (9600) ?
I/FMode(4C)?
Flow(00)?
Port No (901) ?
ConnectMode (C0) ?
Send ’+++’ In Modem Mode (N) ?
Show IP addr after ’RING’ (N) ?
Auto increment source port (Disabled) ?
Remote IP Address: Set to zero for CS Gold.
Remote Port (901) ? Set to zero for CS Gold.
DisConnMode (00) ?
FlushMode (77) ?
Pack Cntrl (00) ?
DisConnTime (00:00) ?
SendChar 1 (00) ?
SendChar 2 (00) ?
4. Enter 9 to save your settings and exit. The XPORT will be rebooted
and will start operating.