Cleveland Medical Devices Inc. 0051 用户手册
Cleveland Medical Devices Inc. RatPaak™ User’s Guide
Channel Properties
The properties of each channel can be configured
on an individual basis. Channel properties can
be viewed by double clicking on any channel
name on the display graph. Later we will discuss
setting the properties for all channels at once by
locking or using group settings. The default
names for the channels are taken from the
configuration file that the unit was programmed
with. The channel name can be changed by
entering the desired name in the field labeled
“Name”. Additionally, clicking on the Color
drop-down box and choosing a color can change
the color of the trace for a specific channel.
The Mark Points option will show the data points
of a waveform. If this option is selected, the waveform will appear as shown below. Use Group Settings
will be discussed later.
on an individual basis. Channel properties can
be viewed by double clicking on any channel
name on the display graph. Later we will discuss
setting the properties for all channels at once by
locking or using group settings. The default
names for the channels are taken from the
configuration file that the unit was programmed
with. The channel name can be changed by
entering the desired name in the field labeled
“Name”. Additionally, clicking on the Color
drop-down box and choosing a color can change
the color of the trace for a specific channel.
The Mark Points option will show the data points
of a waveform. If this option is selected, the waveform will appear as shown below. Use Group Settings
will be discussed later.
Custom Settings
Range refers to the range of values that will be displayed on the y-axis of the Display Graph. The value
entered here represents +/- the range that will be displayed on the plot.
Offset refers to the value that the Display Graph for the particular channel will be centered around. You
can select the offset either by typing in the value or using the mouse to turn the dial to the appropriate
manual.
Upper refers to the upper bound of the Display Graph for that particular channel.
Lower refers to the lower bound of the Display Graph for that particular channel.
Filter Settings
The Low Pass Filter can be turned off or set to a desired value. This filter is a 1
st
order IIR filter.
The High Pass Filter can be turned off or set to a desired value. This filter is a 1
st
order IIR filter.
The Notch Filter can be turned off or set to 50 or 60Hz.
22
CleveMed Proprietary
Information