Honeywell International Inc. CS19A 用户手册

4 - 20

In this example, you are scanning Code 93, Code 128, and Code 39 bar 
codes, but you want the scanner to output Code 39 1st, Code 128 2nd, and 
Code 93 3rd, as shown below.
Note: Code 93 must be enabled to use this example.

You would set up the sequence editor with the following command line:

SEQBLK62999941FF6A999942FF69999943FF

The breakdown of the command line is shown below:

SEQBLKsequence editor start command

62

code identifier for Code 39

9999

code length that must match for Code 39, 9999 = all lengths

41

start character match for Code 39, 41h = “A”

FF

termination string for first code

6A

code identifier for Code 128

9999

code length that must match for Code 128, 9999 = all lengths

42

start character match for Code 128, 42h = “B”

FF

termination string for second code

69

code identifier for Code 93

9999

code length that must match for Code 93, 9999 = all lengths

43

start character match for Code 93, 43h = “C”

FF

termination string for third code

To program the previous example using specific lengths, you would have to 

count any programmed prefixes, suffixes, or formatted characters as part of 
the length.  If you use the example on 

, but assume a <CR> suf-

fix and specific code lengths, you would use the following command line:

The breakdown of the command line is shown below:

A - Code 39

B - Code 128

C - Code 93

Preliminary Draft