Honeywell International Inc. 760002 用户手册

The Scan LED lights red when you press the Scan trigger in scanning applications.
The Decode LED lights green when a scanned bar code is successfully decoded.
Both LEDs are user-programmable.

These hardware buttons appear only on the 29-key numeric keyboard and can be programmed to perform software 
functions in the Buttons setting (Start > Settings > Control Panel > double-tap Buttons). For more information, see 

Keyboards are recessed within the housing to increase durability. There are two keyboard options available: one 
that defaults to numeric (shown above) and one that defaults to alpha. For information about using both keyboards, 
see 

The integrated microphone can be used for voice-recording and reply.

The display is a 65,536-color LCD (Liquid Crystal Display) covered by a touch screen lens. The 2.8” (1/4) VGA 
(Video Graphic Array) is TFT (Thin Film Transistor) color, backlit, and the resolution is 240 x 320; see 

Dolphin 7600 devices ship with a screen protector already installed over the touch screen lens to help prevent 
damage to the touch screen. Do NOT remove this screen protector before initial use. Hand Held Products 
recommends using screen protectors, especially for applications that require high-volume interfacing with the 
touch screen. For more information, see 

For touch screen input, use the stylus included with the terminal or your finger. The method you choose depends 
on which one is most appropriate for your application. While there is a great deal of variation in different applications, 
for buttons or icons that are close together, you generally achieve greater accuracy with the stylus; see 

Use of objects, such as paper clips, pencils, or ink pens on the touch screen can damage the input panel and 
will void the warranty. 

Decode LED

Scan LED

1/4 VGA

 

 

(screen 
protector 
installed at the 
factory)

(29-key 
numeric)

!

!