Adtran TRC3202 用户手册
Section 3, Engineering Guidelines
TRACER 2210/3202 System Manual
26
© 2001 ADTRAN, Inc.
61280012L1-1A
1.
EQUIPMENT DIMENSIONS
TRACER 2210 DIU
The TRACER 2210 unit is 9.0” W, 6.25” D, and 1.5” H, weighs 2 pounds, and can be used in tabletop or
wall-mount configurations.
wall-mount configurations.
TRACER 3202 RIU
The TRACER 3202 RIU is a cylinder 6.0”D and 12.0”H, weighs 10 pounds, and is intended for mast
mount configuration only.
mount configuration only.
2.
POWER REQUIREMENTS
The TRACER 2210/3202 system has a maximum power consumption of 14W and a maximum current
draw of 0.5A.
draw of 0.5A.
3.
CABLE REQUIREMENTS
The cable used to connect the TRACER 2210 to the TRACER 3202 unit should be a 4 conductor, 22 or 24
AWG, UV-resistant cable, maximum length 700 ft or 600 ft, respectively.
AWG, UV-resistant cable, maximum length 700 ft or 600 ft, respectively.
4.
REVIEWING THE FRONT PANEL DESIGN
The front panel contains the display LCD, the scroll selection buttons, the enter and cancel buttons and sta-
tus LEDs. The LEDs provide visual information about the TRACER 2210/3202 system. Figure 1 identifies
the LCD, the various buttons, and the LEDs.
tus LEDs. The LEDs provide visual information about the TRACER 2210/3202 system. Figure 1 identifies
the LCD, the various buttons, and the LEDs.
Figure 1. TRACER 2210/3202 Front Panel Layout
Front Panel LEDs
With the TRACER 2210/3202 powered-on, the front panel LEDs provide visual information about the
status of the TRACER 2210/3202 system. Table 1 provides a brief description of the front panel features,
status of the TRACER 2210/3202 system. Table 1 provides a brief description of the front panel features,
TRACER 2210
PLAN B
PLAN A
CHAN
RF DWN
TEST
V.35
RF LOW CABLE
Display LCD
Scroll Buttons
Status LEDs
Enter Button
Cancel Button