Adtran TRC3202 用户手册
TRACER 2210/3202 System Manual
Section 4, Network Turnup Procedure
61280012L1-1A
© 2002 ADTRAN, Inc.
33
Customer Provides
The following items are necessary for the installation of the TRACER 2210/3202 system and are not
provided by ADTRAN:
provided by ADTRAN:
•
4 Conductor, 22 or 24 AWG, UV-resistant cable (maximum length 700 ft or 600 ft, respectively)
4.
CABLE ASSEMBLY
The following provides pictorial instructions for assembling the cable between the TRACER 2210 and
3202 units. The cable length and material should be customized to suit the needs of the application. All of
the necessary connector pieces are supplied by ADTRAN in your TRACER 2210/3202 shipment.
3202 units. The cable length and material should be customized to suit the needs of the application. All of
the necessary connector pieces are supplied by ADTRAN in your TRACER 2210/3202 shipment.
Figure 1. Cable Assembly Instructions
1
2
3
4
2
3
4
1
2
3
4
2
3
4
P1
P2
Schematic
1
2
3
4
P1
P2
1 & 2
3 &
4
1 & 2
3 &
4
1 & 2
3 & 4
Tracer 3202 base (Version 1)
Tracer 3202 base (Version 2)
1. Crimp each crimp tube and wrap
individually with electrical tape to
prevent shorting
2. Wrap the complete bundle with
electrical tape to protect from
outside elementsmosture.
individually with electrical tape to
prevent shorting
2. Wrap the complete bundle with
electrical tape to protect from
outside elementsmosture.
Warning: When connecting the
supplied cable to your in house
wiring, do not attach the block
assembly to the TRACER 2210
base unit until cable assembly is
complete.
supplied cable to your in house
wiring, do not attach the block
assembly to the TRACER 2210
base unit until cable assembly is
complete.