Adtran TRC582TM1 用户手册
TRACER 2xT1 User’s Manual
61280003L2-1B
Section 3 Operation
30
Preliminary
Main Menu Page
Pressing “M” on any screen will take the user to the Main Menu, from which the subsequent screens can
be accessed.
be accessed.
T1 Status Page
The status of the two T1 interfaces is displayed on this screen. Information such as alarm status, T1
receive levels, line coding, and framing type are shown. This is a status screen only.
receive levels, line coding, and framing type are shown. This is a status screen only.
Figure 3-5. T1 Status Page
TRACER T1 Status Menu
Site: Adtran
T1A T1B
Loop/Normal State Normal Normal
Received Signl Lvl +2dB to -7.5dB Less than -22.5dB
RX LOS (Red) Alarm No Yes
RX AIS (Blue) Alarm No No
RX Yellow Alarm No No
TX AIS (Blue) Alarm No Yes
Framing ESF (*) ESF (*)
Line Code B8ZS (*) B8ZS (*)
Line Build Out DS1 0dB (*) DS1 0dB (*)
Received Signl Lvl +2dB to -7.5dB Less than -22.5dB
RX LOS (Red) Alarm No Yes
RX AIS (Blue) Alarm No No
RX Yellow Alarm No No
TX AIS (Blue) Alarm No Yes
Framing ESF (*) ESF (*)
Line Code B8ZS (*) B8ZS (*)
Line Build Out DS1 0dB (*) DS1 0dB (*)
(*) Indicates last set by front panel. Otherwise last set by terminal.
===============================================================================
Press ‘m’ - Main menu
===============================================================================
Press ‘m’ - Main menu
Figure 3-4. Main Menu Page
TRACER Main Menu, Rev: A, 12/13/99 16:04:00
Site: Adtran
1) T1 Status Page
2) Link Performance History
3) T1A Performance History
4) T1B Performance History
5) Alarm Page
6) Test Menu
7) Configuration Menu
8) Remote Access
2) Link Performance History
3) T1A Performance History
4) T1B Performance History
5) Alarm Page
6) Test Menu
7) Configuration Menu
8) Remote Access
===============================================================================
Press ESC for System Status:
Press ESC for System Status: