Xmark Corporation APC 用户手册
Compact eLink Reader
981-000037-000
eXI Wireless Systems
14
July 2003
Revision
1.0
The Wireless Keypad is powered by a lithium battery at 3V / 220 mAH. The
battery is designed to last for at least 5 years with average of 100 keypad entries
per day.
When the battery is low on the keypad the “Battery Low” RED light will flash once
every 6 seconds, and the Controller buzzer will give a low tone beep at the same
time.
The battery is easily replaceable by opening the enclosure from the front.
4. Passwords
There are two types of passwords: Master password and User password. Master
password is used to assign or delete User password. User passwords are used to by-
pass the system.
There is only one Master password and 2 user passwords. All passwords are 4 digit
numbers.
4.1. Master Password
This password is used to change or delete User password or to change itself
(Master password).
To change Master Password:
1. Enter existing Master password
2. Press ‘ENTER’ key
3. Enter existing Master password again
4. Press ‘ENTER’ key
5. Enter new 4 digit Master password (not less then 4 digits)
6. Press ‘ENTER’ key
7. After this the keypad Bypass light will flash 3 times and Controller buzzer
will beep 4 times to
indicate that new Master password is accepted by both, the Keypad and
the Controller.
4.2. User password
This password is used to bypass the system and to silence the alarms.
To change/add User password:
1. Enter Master Password
2. Press ‘ENTER’ key
3. Enter password slot number (1 or 2)
4. Press ‘ENTER’ key
5. Enter new 4 digit User password (not less then 4 digits)
6. Press ‘ENTER’ key
After this the keypad Bypass light will flash 3 times and Controller buzzer will
beep 2 times to indicate that new User password is accepted by both, the Keypad
and the Controller.
To delete User Password:
1. Enter Master Password
2. Press ‘ENTER’ key