Zero One Technology Co. Ltd. WR02001 用户手册

                                                                                                23

The Broadband DSL/Cable Wireless Router is easily added
to an existing network that already has IP addresses
assigned. The following assumes that you have configured
TCP/IP for your network (and on each computer) and are
now adding the Broadband DSL/Cable Wireless Router for
Internet access. We also assume that you will not be using
the Broadband DSL/Cable Wireless Router DHCP server to
dynamically allocate and assign addresses (since you
already assigned IP addresses to each computer).

The following steps use an example pre-existing network of
computers with IP addresses 204.1.1.1 through 204.1.1.154
(IP addresses of Class C, without any IP sub-networks).
Please follow the steps listed below to use your existing IP
addresses with the Broadband DSL/Cable Wireless Router.

1. 

From your range of available IP addresses, select
a single IP address to be used as the Broadband
DSL/Cable Wireless Router’s address (such as
204.1.1.100).

2. 

Select one computer (we strongly recommend
Windows 95/98/Me or Windows  NT/2000) to
configure the Broadband DSL/Cable Wireless
Router.