Zero One Technology Co. Ltd. WR02001 用户手册
Broadband DSL/Cable Wireless Router User’s Manual
24
Open the Network properties dialog box of the
computer, and write down its current IP settings,
including IP address and DNS Server IP address
(provided by your ISP).
computer, and write down its current IP settings,
including IP address and DNS Server IP address
(provided by your ISP).
Next, check (tick) the Specify an IP Address option
in the TCP/IP properties dialog box and enter
192.168.1.2 for the IP address and 255.255.255.0
for the subnet mask. Finally, enter 192.168.1.1 for
the gateway IP address. You must then restart your
computer to update the new TCP/IP settings.
in the TCP/IP properties dialog box and enter
192.168.1.2 for the IP address and 255.255.255.0
for the subnet mask. Finally, enter 192.168.1.1 for
the gateway IP address. You must then restart your
computer to update the new TCP/IP settings.
3.
On the same computer, open your web browser.
4.
Type the default IP address (192.168.1.1) in the
Location box and press Enter. The device’s
Home Page will then appear.
Location box and press Enter. The device’s
Home Page will then appear.
5.
It then shows an authentication dialog for the
Broadband DSL/Cable Wireless Router. Type the
default administration user name, admin, and type
the default configuration password 0000. Then
click OK, as shown in following figure.
Broadband DSL/Cable Wireless Router. Type the
default administration user name, admin, and type
the default configuration password 0000. Then
click OK, as shown in following figure.