Mustek Systems Inc H410W 用户手册
12
Connect to Wireless Network (Wi-Fi Mode)
You can make a direct wireless connection between the
Scanner and your device in following steps.
1. Press and hold the POWER/SCAN button for 3
1. Press and hold the POWER/SCAN button for 3
seconds until the power LED emits green light.
* Wait about 20 seconds until the Wi-Fi LED blinks blue light.
2. Enable the Wi-Fi mode on your device, search
the “DIRECT-xxxxxx_iScanAirGo” network for the
Scanner, then select it.
* The "xxxxxx" in the network name is a 6-digit code randomly
assigned for your Scanner.
3. Input 8-digit password “
12345678
” to connect
the Scanner.
* The Wi-Fi indicator will stop blinking and become a solid
blue light after connected.
Connected
Wi-Fi On
• Be sure the Scanner is used within approximately 60 feet
~100 feet (18m~30m) from your Wi-Fi enabled device in
an obstacle free indoor environment.
• The Scanner will automatically shut down if there is no
operation for
5 minutes
for saving power.
• The Scanner allows connection up to
8
Wi-Fi enabled
devices at once.
NOTES
ON