Mustek Systems Inc H410W 用户手册

13

 

Scan, Save, and Share (Wi-Fi Mode)

•  Ensure the Scanner is switched to the “Wi-Fi” mode on 

the side of the Scanner, and is connected to your device 

prior to use. (See p.12)

•  Make sure your device is supported. (See p.4)

1.  Press iScanAir Go app on your device to open it, 

then press Start.

*  For Windows 8, swipe in or mouse in from the right edge of 

the screen. Select "File Format" from the menu, and choose 
"Scan to JPG" or "Scan to PDF".

2.  Place the Scanner on the object with the scanning 

lens facing down, making sure the scanned area is 

located between the two arrows on the scanner. 

3.  Press the POWER/SCAN button to start scanning. 

*  The Wi-Fi LED ( ) will blink a purple light.

4.  Move the scanner slowly and steadily down towards 

the bottom of the object, press the POWER/SCAN 

button again to end scanning.

*  Ensure the Status LED (   ) blink green light at the normal 

speed during scanning.

(continued on the next page)

Press POWER/SCAN to end.

*  The app looks slightly different 

depending on your device's 

operating system

Press Start.