Mustek Systems Inc H410W 用户手册

17

 

Calibrate  

•  Always clean the Scanner’s rollers and lens first before 

calibration. If cleaning rollers and lens did not improve 

image quality, then please perform calibration procedures.

•  If necessary, perform calibration few times until the image 

quality is improved.

•  Make sure the Calibration Sheet is clean and free of dust 

before use.

1.  Slide the Wi-Fi/Micro SD switch to “Wi-Fi” and 

connect to wireless network. (See p.12)

2.  Press iScanAir Go app on your device to open it. 
3.  Find the Settings icon or Menu button on your 

device to enter, then select the Calibrate.

4.  Remove the plastic foil on the Calibration Sheet, 

place it on the table with the white side facing up.

5.  Place the scanner on the Calibration Sheet, then 

move it back and forth only in the white area few 

times until the "Calibration Done" message appears.

Select Calibrate from the Settings menu.