Mustek Systems Inc H410W 用户手册
19
Helpful Hints
Scanner does not turn on.
•
•
Press and hold the POWER/SCAN button 3 seconds to turn on.
•
Check if the Scanner’s battery has drained and no power is available.
Scanner cannot connect to your device.
•
•
Try moving the Scanner closer to your device. The effective wireless transmission range is 60~100 feet (18~30m)
unobstructed.
•
Make sure the Wi-Fi LED of the Scanner is blinking blue.
•
Check that the network name on your device is matched to the Scanner. (See p.12)
•
Check if the Scanner is being used by another user, please wait and try again later.
Scanner operation interrupted.
•
•
Check if the Wi-Fi connection is disconnected. Reconnect or restart the Scanner.
Cannot save scan results to your device.
•
•
Check if the Scanner and the mobile device has a low power.
•
Check if the storage memory is full.
Scanner hangs with red power LED.
•
Free up some memory and restart the scanner.
My device runs iOS6, a message ‘iScanAir Go Would Like to Access Your Photos’ appears after pressing SAVE button.
•
•
This is a privacy settings requested by your device. Press ‘OK’ button in order to save images to your device. If you select
‘Don’t Allow’, no image will be saved, and you will get an error message for the next scan. Follow on-screen instructions to
solve the problem: select Settings > Privacy > Photos > iScanAir Go > "ON" to allow iScanAir Go app to access your photos.
Scan result is poor.
•
•
Please clean the Scanner’s rollers and lens. If image quality is not improved, then please perform calibration procedures.
Images look distorted.
•
•
The scanning speed is too fast. Scan again with a slow constant speed.