Zebra Technologies Corporation RFID-M2HF 用户手册
127
Troubleshooting
Print Quality Problems
12/2/05
XiIIIPlus/R110Xi/R170Xi User Guide
13383L-002 Rev. A
The bar code printed
on a label does not
scan.
on a label does not
scan.
The bar code is not within
specifications because the print
is too light or too dark.
specifications because the print
is too light or too dark.
Perform the
FEED Self Test on page 138
. Adjust
the darkness or print speed settings as necessary.
Not enough blank space around
the bar code.
the bar code.
Leave at least 1/8 in. (3.2 mm) between the bar
code and other printed areas on the label and
between the bar code and the edge of the label.
code and other printed areas on the label and
between the bar code and the edge of the label.
Table 12 • Print Quality Problems (Continued)
Problem
Possible Cause
Recommended Solution