Zebra Technologies Corporation RFID-M2HF 用户手册
Troubleshooting
Calibration Problems
Calibration Problems
128
13383L-002 Rev. A
XiIIIPlus/R110Xi/R170Xi User Guide
12/2/05
Calibration Problems
Table 13
identifies problems with calibration, the possible causes, and the recommended
solutions.
Table 13 • Calibration Problems
Problem
Possible Cause
Recommended Solution
Loss of printing
registration on labels.
Excessive vertical drift
in top-of-form
registration.
registration on labels.
Excessive vertical drift
in top-of-form
registration.
Improperly positioned media
guides.
guides.
Ensure that the media guides are properly
positioned.
positioned.
Media type set incorrectly.
Set the printer for the correct media type
(non-continuous or continuous). See
(non-continuous or continuous). See
Set Media
Type on page 59
.
Dirty platen roller.
Clean the platen roller according to the
instructions in
instructions in
Clean the Printhead and Platen
Roller on page 109
.
Auto Calibrate failed.
Improperly loaded media or
ribbon.
ribbon.
Ensure that media and ribbon are loaded
correctly.
correctly.
The sensors could not detect the
media or ribbon.
media or ribbon.
Manually calibrate the printer (see
Calibrate
Media and Ribbon Sensor Sensitivity
on page 70
on page 70
).
Sensors dirty or improperly
positioned.
positioned.
Ensure that the sensors are clean and properly
positioned.
positioned.