JVC KENWOOD Corporation J5180 用户手册

■

[

Tweeter] (Only for Front)

You can set the tweeter when you are 
selecting front speakers.
None, Small, Medium, Large

■

[

X over]

Displays the speaker crossover setup screen.
You can adjust the crossover setup that was 
set automatically when you selected the 
speaker type.
For details, see Crossover network setup 

 

Ñ

You can set a crossover frequency of speakers.

Touch [X over].

■

[

HPF FREQ]

High Pass Filter adjustment. (When front or 
rear speaker is selected on Speaker Select 
screen)

■

[

LPF FREQ]

Low Pass Filter adjustment. (When subwoofer 
is selected on Speaker Select screen)

■

[

Slope]*

Sets a crossover slope.

■

[

Gain]

Adjusts the front speaker, rear speaker, or 
subwoofer level.

■

[

TW Gain] *

Adjusts the tweeter level. (When front is 
selected on Speaker Select screen)

■

[

Phase Inversion]*

Sets the phase of subwoofer output.
Check [

Phase Inversion] to shift the phase 

180 degrees. (When subwoofer is selected 
on Speaker Select screen)

*

1

  Only when “LPF FREQ”/“HPF FREQ” is set to 

a mode other than “Through” in [

X over].

*

2

  Only when “Tweeter” is set to “Small”, 

“Medium”, “Large” in [

Speaker Setup].

*

3

  Only when “Subwoofer” is set to a mode 

other than “None” in [

Speaker Setup].

Press the [MENU] button.

h

h

Popup menu appears.

Touch [Audio].

h

h

Audio screen appears.

Touch [Fader / Balance].

■

[

Fader / Balance]

Adjust the volume balance around the 
touched area.
[

C] and [D] adjust the right and left volume 

balance.
[

R] and [S] adjust the front and rear volume 

balance.

■

[

Center]

Clear the adjustment.