Xmark Corporation IPSR 用户手册

Important!

Have you:

•  Pulled network and power cable?
•  Resolved power supply requirements?
•  Selected the location for the PS Receiver?

Materials Required

• International Patient Security Receiver (p/n 816A1001)
• Facility fl oor plan indicating Receiver position and net-

work wiring path

• 105 Ω network terminator (p/n 805A2401) - if this is the

last device on the network segment

Specifi cations

Recommended Receiver Antenna

Orientation

For best coverage, ensure that the antennas are at
least 3 ft. (91 cm) from metal objects, such as fram-
ing or air ducts. Do not encase, wrap, or otherwise
cover the antennas.
One antenna must be pointing downward with the
second antenna aimed horizontally into a clear area,
free of metal objects. The two antennas must be at
right angles to one another.
Use the illustrations below as a guideline for antenna
orientation.

Certifi ed to the ISO 9001 Quality Standard

Part Number:

816A1001

Model

International Patient Security Receiver

Part Number

816A1001

Frequency

434.17 MHz

Supply Voltage

12-30 VDC

Current Draw

150 mA max. @ 12 V, 80 mA max. @

24V

Detection

Radius

35 ft. (11 m) for typical Receiver setup

50 ft (15 m) Receiver in open space

Communications LonWorks two wire

Ethernet port - currently non-

functional.

Temperature

Operating: 32°F to 120°F (0°C to

49°C)

Storage: -22° to 158° F (-30° to 70°C)

Humidity

0-85% RH @ 70°F (21°C), non-con-

densing

Dimensions

Approximately 6.1 x 4.9 x 1.7 in. (155

x 125 x 45 mm)

Weight

Approximately 8.5 oz. (240 g)

Read these instructions thoroughly before
installing the PS Receiver. Faulty installation
can lead to system failure.

Patient Security Receiver Installation Guide

309 Legget Drive Ottawa, ON K2K 3A3 Canada
Telephone: 1.866.559.6275 International: +1 (613) 592.6997 Facsimile: (613) 592.4296
Web site: www.stanleyhealthcare.com