Deister Electronic GmbH APRBHI 用户手册
APR300/400
07.06.05
Vertraulich / Confidential
Page 7 of 19
3. Operating
the
APR
Before starting operation of the APR reader, the batteries being supplied separately have to
be put in the battery case. In case that you would like to use other types of batteries, resp.
rechargeable batteries, please read chapter 5.3.8 POWER MANAGER to set the battery
type.
Caution! An other battery type than it is chosen in the selection list, might cause harm to the
reader.
be put in the battery case. In case that you would like to use other types of batteries, resp.
rechargeable batteries, please read chapter 5.3.8 POWER MANAGER to set the battery
type.
Caution! An other battery type than it is chosen in the selection list, might cause harm to the
reader.
3.1 Power on{ XE "Power on" }
After the reader is switched on with the ON/OFF key, the DISPLAY is switching between four
different formats:
different formats:
AGRIDENT V X.X
XX.XX.XX XX:XX
XX.XX.XX XX:XX
Date and time
AGRIDENT V X.X
Battery X.XX V
Battery X.XX V
Battery condition
AGRIDENT V X.X
Memory X/XXXX
Memory X/XXXX
Memory use
AGRIDENT V X.X
Ext. Power off/on
Ext. Power off/on
Type of power supply
3.2 Start READ{ XE "Read" }
After switch on the reader with the ON/OFF key a READ is started with one of the
HOTKEYS, any other action that is connected with the HOTKEY (A or B) will run
automatically after reading.
HOTKEYS, any other action that is connected with the HOTKEY (A or B) will run
automatically after reading.
READ HOTKEY A
……….
……….
3.3 Quick start{ XE "Quick start" }
With the HOTKEY A or B the reader starts direct into the READ modus. After reading, any
other action that is connected with the HOTKEY (A or B) will run automatically.
READ HOTKEY A
……….
other action that is connected with the HOTKEY (A or B) will run automatically.
READ HOTKEY A
……….
3.4 No ID found{ XE "No transponder" }
If there is no transponder in the field of the antenna or nor valid ID is received (e.g. a faulty
transponder or too much noise). Display:
NO TRANSPONDER
Action stopped
A new read could be started by pressing HOTKEY A or B.
transponder or too much noise). Display:
NO TRANSPONDER
Action stopped
A new read could be started by pressing HOTKEY A or B.