Roseman Engineering Ltd. FG3E 用户手册
Fleet Gate Installation Guide Roseman Engineering Ltd
4
The Fueling Division of Roseman Engineering Ltd.
1. Introduction
1.1 Purpose
This Vehicle Subsystem Installation Manual is provided to assist you in installing
the Modular Fleet Gate Type 3 (FG3). Review this manual prior to the installation
of the FG3 to ensure proper installation practices. Incorrect installations are the
major cause of system malfunctions.
the Modular Fleet Gate Type 3 (FG3). Review this manual prior to the installation
of the FG3 to ensure proper installation practices. Incorrect installations are the
major cause of system malfunctions.
The FG3 must be installed as described in this manual to ensure the reliability and
proper operation of the system.
proper operation of the system.
Please read this entire manual before starting your first installation.
1.2 System Overview
The Roseman FG3 is the integral component of the vehicle subsystem of the
Roseman FMS System. To properly install and utilize
Roseman FMS System. To properly install and utilize
the FG3 the following is
required:
Roseman Fuel Management System Island Controllers
Pumps/dispensers modified using nozzle tags
WAF Receiver Upgrade Kit installed in the Island Controller
Failure to use a shielded cable as described in this manual will
void the warranty.
void the warranty.
1.3 Components Overview
This section describes the various components that operate as part of the
Roseman System. Use this information to determine the equipment needed for
your particular fleet of vehicles.
Roseman System. Use this information to determine the equipment needed for
your particular fleet of vehicles.
Each Vehicle Unit includes the following components:
SVID (Small Vehicle Identification Device) Type 3
Modular Fleet GateType 3 (FG3)
Fuel inlet Antenna