KAPSCH TRAFFICCOM CANADA INC. 801235 用户手册
T600 Tag Tester User Guide
Step (2)
Remove your hand Completely from the opening of the T600 Tag Tester.
Correct
Incorrect
Step (3)
Press the “Test Start” button at the top of the window to start the test or use
keyboard short cut <CTRL>A.
Do not move the transponder while the “Test in progress” message is displayed
on the screen or the red “Test in Progress” light on the front panel of T600 Tag
Tester is active. If a tag is removed during testing, the test will be aborted.
6.4
Test Response
Within a few seconds, a large “Tag PASS” (in green) or “Tag FAIL“ (in red)
message is displayed. Refer to the Appendix A for sample screen shots.
A new record will be added to the log file. (If the “Log only failed tests” checkbox
is checked, only failed results are logged).
A316000-852
Jan 19, 2009
Page 13 of 19
© 2009 MARK IV INDUSTRIES LTD.
EXCEPT AS MAY BE OTHERWISE PROVIDED BY CONTRACT, THESE DRAWINGS AND SPECIFICATIONS CONTAIN
PROPRIETARY INFORMATION AND ARE THE PROPERTY OF MARK IV INDUSTRIES LTD. AND ARE ISSUED IN STRICT
CONFIDENCE AND SHALL NOT BE TRANSMITTED OR REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE
OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION.
EXCEPT AS MAY BE OTHERWISE PROVIDED BY CONTRACT, THESE DRAWINGS AND SPECIFICATIONS CONTAIN
PROPRIETARY INFORMATION AND ARE THE PROPERTY OF MARK IV INDUSTRIES LTD. AND ARE ISSUED IN STRICT
CONFIDENCE AND SHALL NOT BE TRANSMITTED OR REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE
OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION.