KAPSCH TRAFFICCOM CANADA INC. 802295 用户手册
_
JANUS
®
Multi-Protocol Reader Ver. 2: Maintenance Instructions
Confidential
UM 360450-210: A7
Page 136 of 282
© Kapsch TrafficCom Canada Inc. 2013
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict
confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or
used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX
10/31/2013 7:56
Kapsch TrafficCom
Field
Description
Master
Set
The set of three (3) inter-Reader channels that have the most tag reads (C = center
Reader, L = left Reader, R = right Reader). (present only if in interpolated lane
assignment mode)
Zone
Sub-zone information (a – f). (Present only if in interpolated lane assignment mode)
Ch
Channel number. Indicates the assigned channel (1-8). Channel 1 corresponds to the
leftmost RF module in the RF rack.
St
Transaction status.
Pgm indicates successful transponder programming.
PU indicates transponder programming status is Unknown (tag left zone before verify
Pgm indicates successful transponder programming.
PU indicates transponder programming status is Unknown (tag left zone before verify
could complete).
PF indicates transponder was not programmed successfully.
Read indicates the Reader is in read only mode.
CrossR indicates an informational report (not a transaction).
PF indicates transponder was not programmed successfully.
Read indicates the Reader is in read only mode.
CrossR indicates an informational report (not a transaction).
Txn
Transaction number. Note that transaction numbers may appear to skip when using 2 or
more Readers with Ethernet connection between them.
Ag
Agency ID of transponder in capture zone.
Sn
Serial number of transponder in capture zone.
Ahs
Number of handshakes up to voting time.
THs
Total Handshakes for previous transaction assigned to this channel.
GUARD
Shown for a transaction assigned to a RF channel set to Guard. These transactions will
show
!LC to indicate that no report for the LC is generated. Tag programming is disabled
for Guard channels.
?LA
In a POST report, indicates that a lane assignment change was detected between the
voting time report and the post time report. May be an indication that voting time is not
optimal.
?PS
In a POST report, indicates that a programming status change was detected between the
voting time report and the post time report.
>LC
>LC indicates transaction is to be reported to lane controller (connection present or not).
Only appears on the Active CTM
!LC
!LC indicates transaction is suppressed (e.g. GUARD lane or CrossR transactions or
CTM is Inactive).
Cx-HS
HS tag handshakes seen up to voting/post time on the MasterSet center Reader.
Lx-HS
HS tag handshakes seen up to voting/post time on the MasterSet left Reader.