KAPSCH TRAFFICCOM CANADA INC. 802295 User Manual

JANUS

Multi-Protocol Reader Ver. 2: Maintenance Instructions

Confidential

UM 360450-210: A7

Page 136 of 282

These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict

confidence and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or

used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.

FILE: UM 360450-210 OPERATIONS AND MAINTENANCE MANUAL.DOCX

10/31/2013 7:56

Kapsch TrafficCom

Field

Description

Master

Set

The set of three (3) inter-Reader channels that have the most tag reads (C = center

Reader, L = left Reader, R = right Reader). (present only if in interpolated lane

assignment mode)

Zone

Sub-zone information (a – f). (Present only if in interpolated lane assignment mode)

Channel number. Indicates the assigned channel (1-8). Channel 1 corresponds to the

leftmost RF module in the RF rack.

Transaction status.
Pgm indicates successful transponder programming.
PU indicates transponder programming status is Unknown (tag left zone before verify

could complete).
PF indicates transponder was not programmed successfully.
Read indicates the Reader is in read only mode.
CrossR indicates an informational report (not a transaction).

Txn

Transaction number. Note that transaction numbers may appear to skip when using 2 or

more Readers with Ethernet connection between them.

Agency ID of transponder in capture zone.

Serial number of transponder in capture zone.

Ahs

Number of handshakes up to voting time.

THs

Total Handshakes for previous transaction assigned to this channel.

GUARD

Shown for a transaction assigned to a RF channel set to Guard. These transactions will

show

!LC to indicate that no report for the LC is generated. Tag programming is disabled

for Guard channels.

?LA

In a POST report, indicates that a lane assignment change was detected between the

voting time report and the post time report. May be an indication that voting time is not

optimal.

?PS

In a POST report, indicates that a programming status change was detected between the

voting time report and the post time report.

>LC

>LC indicates transaction is to be reported to lane controller (connection present or not).

Only appears on the Active CTM

!LC

!LC indicates transaction is suppressed (e.g. GUARD lane or CrossR transactions or

CTM is Inactive).

Cx-HS

HS tag handshakes seen up to voting/post time on the MasterSet center Reader.

Lx-HS

HS tag handshakes seen up to voting/post time on the MasterSet left Reader.