Trimble Inc. 5935524-B1 用户手册
F Data Logging and Postprocessed Measurement Operations
120 SPSx80 and SPSx81 Smart GPS Antennas User Guide
Connecting to the office computer
The Smart GPS antenna can communicate with the office computer using a serial
connection from the DB9 connector on the receiver to a LEMO connector on the
computer (see
connection from the DB9 connector on the receiver to a LEMO connector on the
computer (see
). You can also use the supplied DB9 to DB9 cable (P/N 18532
or 59046 (RoHS compliant). Before you connect to the office computer, ensure that the
receiver battery is fully charged.
receiver battery is fully charged.
Figure F.1
Connecting the SPS881 Extreme Smart GPS antenna to a computer for serial
data transfer
data transfer
Transferring files directly from a CompactFlash card
Data is stored in the internal flash memory. To transfer files between the receiver and
your office computer, connect the receiver to the office computer and use the Data
Transfer utility to transfer files.
your office computer, connect the receiver to the office computer and use the Data
Transfer utility to transfer files.
When you use the Data Transfer utility to transfer data files from the receiver, the Data
Transfer utility converts the raw receiver data (.T01) files you select into the Trimble
DAT file format.
Transfer utility converts the raw receiver data (.T01) files you select into the Trimble
DAT file format.
You can convert receiver data files by using a Windows Explorer extension which is
installed on your computer when you install the Data Transfer utility.
installed on your computer when you install the Data Transfer utility.
Deleting files in the receiver
You can delete files stored in the receiver at any time. Do one of the following:
•
Press
E
for 30 seconds after the receiver is turned on. (When you use this
method, all data is deleted.)
Serial (COM) port
Serial cable