Trimble Inc. 5940071-B1 用户手册
Trimble R6/R7 GPS and Trimble R8 GNSS Receivers User Guide 47
Transferring Data 6
Tr
imble R7 GPS Receiver Oper
ation
The DAT File Conversion dialog appears while the file is converted. When the dialog
disappears, the file conversion is complete.
disappears, the file conversion is complete.
A new file with the same filename but a .dat extension appears in the same folder as
the .T01 file.
the .T01 file.
6.1
Deleting files in the receiver
You can delete files stored in the receiver at any time. Do one of the following:
•
Use the Data Transfer utility in the Trimble Geomatics Office software.
•
Use the TSCe controller.
•
Turn on the receiver and then hold down
[P]
for 30 seconds. When you use this
method, all data is deleted, and the CompactFlash card is reformatted.
•
Use the GPS Configurator software.
6.2
Supported file types
shows the file types that you can transfer to or from a Trimble R7 GPS
receiver, and the software or utility that you must use to transfer each file type.
Note – The Trimble R7 GPS receiver supports a maximum of 512 files on the
CompactFlash card. Files stored on the compact flash must be 8.3 format. The Trimble R7
GPS receiver does not support extended file names.
CompactFlash card. Files stored on the compact flash must be 8.3 format. The Trimble R7
GPS receiver does not support extended file names.
Table 6.1
Supported file types
File Type
Extensions
Transfer from
Trimble R7 GPS
receiver?
Trimble R7 GPS
receiver?
Transfer to
Trimble R7 GPS
receiver?
Trimble R7 GPS
receiver?
Software /
utility
utility
Ephemeris .eph
Yes
No
Data
Transfer
Raw observations
.T01, .dat
Yes
No
Data Transfer
Receiver firmware files
.elf
No
Yes
WinFlash
Application files
.cfg
Yes
Yes
GPS
Configurator
Configurator