Fargo Electronics Inc OMNI5121P 用户手册
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.5)
13
Memory
16MB RAM
Operating
Temperature
Temperature
65º F to 90º F (18º C to 32º C).
Options
•
Card Lamination Module – single-sided or double sided
•
Magnetic stripe encoding dual-sided (simultaneous)
•
200-card input hopper
•
Smart card encoding (contact/contactless)
•
Dual-sided printing
•
Door and cartridge locks
•
Printer cleaning kit
Output Hopper
Card Capacity
Card Capacity
HDP5000/HDP5000-LC
•
200 cards (.030mm)
Overlaminate
Options
(HDP5000-LC
and HDP5000
only)
Options
(HDP5000-LC
and HDP5000
only)
All overlaminates are available in either clear, holographic globe
design or custom holographic design. They can also be optimized
for use with smart cards and Magnetic Stripes.
design or custom holographic design. They can also be optimized
for use with smart cards and Magnetic Stripes.
Here are the options:
•
Thermal Transfer Overlaminate, .25 mil thick, 500 prints
•
PolyGuard® Overlaminate, 1.0 mil and .6 mil thick, 250 prints
(PolyGuard available in a CR-80 patch size)
(PolyGuard available in a CR-80 patch size)
Power Supply
•
80W for HDP5000
•
160W (two 80W bricks) for the HDP5000-LC
(Note: This product is intended to be supplied by a Listed Power
Unit marked "Class 2" and rated for 24 V dc, 3.75 to 5 A.)
Unit marked "Class 2" and rated for 24 V dc, 3.75 to 5 A.)
Print Area
Over-the-edge on CR-80 cards.
Printing Method
HDP™ Dye-Sublimation / Resin Thermal Transfer