Fargo Electronics Inc OMNI5121P 用户手册
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.5)
14
Print Ribbon
Options
Options
HDP5000 and HDP5000-LC (prints or images):
•
Full color, YMC*, 750 prints
•
Full color with resin black, YMCK*, 500 prints
•
Full color with two resin black Panels, YMCKK*, 500 prints
•
Full color YMC with resin black and heat seal panel for difficult-
to-print surfaces, YMCKH*, 500 prints
to-print surfaces, YMCKH*, 500 prints
•
Full color YMC with resin black and UV fluorescing panel,
YMCFK*, 500 prints
YMCFK*, 500 prints
•
Full color YMC with resin black and Inhibitor panel, YMCKI*,
500 prints
500 prints
•
Premium Black Resin (K) 3000 prints
*Indicates the Ribbon type and the number of Ribbon panels
printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black,
H=Heat Seal and F=Fluorescing
printed where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black,
H=Heat Seal and F=Fluorescing
Print Speed-
Batch Mode
Batch Mode
HDP5000 and HDP5000-LC (see note below):
•
30 seconds per card / 95 cards per hour (YMC with transfer)
•
35 seconds per card / 78 cards per hour (YMCK with
transfer)F
transfer)F
•
50 seconds per card / 51 cards per hour (YMCKK with
transfer)*
transfer)*
•
70 seconds per card / 51 cards per hour (YMCFK with
transfer)*
transfer)*
•
50 seconds per card / 72 cards per hour (YMCK with transfer
and dual-sided, simultaneous lamination)*
and dual-sided, simultaneous lamination)*
•
75 seconds per card / 48 cards per hour (YMCKK with transfer
and dual-sided, simultaneous lamination)*
and dual-sided, simultaneous lamination)*
•
70 seconds per card / 48 cards per hour (YMCKI with transfer)
•
17.5 seconds per card/ cards per hour (K with transfer)
•
Print speed indicates an approximate print speed and is
measured from the time a card feeds into the Printer to the
time it ejects from the Printer.
measured from the time a card feeds into the Printer to the
time it ejects from the Printer.
•
Print speeds do not include encoding time or the time needed
for the PC to process the image.
for the PC to process the image.
•
Process time is dependent on the size of the file, the CPU,
amount of RAM and the amount of available resources at the
time of the print.
amount of RAM and the amount of available resources at the
time of the print.