Fargo Electronics Inc X001700 用户手册
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP100 High Definition Card Printer/Encoder User Guide (Rev. Beta)
4
Troubleshooting the LCD Messages (continued)
LCD Message
Cause
Solution
Empty
Indicates no cards or
empty.
empty.
Refill.
FILM OUT
The HDP Film has run
out.
out.
OR
The HDP Film will soon
run out.
run out.
Install a new roll of film and press
RESUME to continue or CANCEL
to reset.
RESUME to continue or CANCEL
to reset.
If this appears as an error, see
.
Flipper Jam
A card is jammed in the
card flipping area of the
Printer.
card flipping area of the
Printer.
Clear the jam. See
Flipper Jam
procedure.
Film Align Error
Unable to align film.
OR
If this appears as a
prompt, the HDP Film
is self-aligning to the
proper position for
printing.
prompt, the HDP Film
is self-aligning to the
proper position for
printing.
Check for obstruction. If the
problem persists, call for technical
assistance. If this appears as an
error, see
problem persists, call for technical
assistance. If this appears as an
error, see
procedure.
Film Break/Jam
FILM LOW
FILM RELEASE
FILM RELEASE
ERROR
ERROR
The HDP Film is not
installed properly or
has run out, jammed,
broken or been
damaged.
installed properly or
has run out, jammed,
broken or been
damaged.
If this appears as an error, see
or
Resolving a Film
.
Film: Wrong Material
The HDP Film is not
installed properly or
has run out, jammed,
broken or been
damaged.
installed properly or
has run out, jammed,
broken or been
damaged.
If this appears as an error, see
or
Resolving a Film
.
Continued on the next page