JVC KENWOOD Corporation 37663210 用户手册

19

2-tone Signaling is enabled or disabled by your dealer.  This function opens the
squelch only when the transceiver receives the 2 tones corresponding to the
2-tone code set up on your transceiver.  Transceivers that do not transmit the
correct tones will not be heard.

When you receive a signal containing the correct code, the squelch opens and
you will hear the call.

• The 

 icon appears on the display and blinks.

• To mute the speaker after the squelch opens, press the key programmed as Monitor.

• Your dealer can program the transceiver to mute the speaker after a specified time

period elapses.

• If Transpond is programmed, an acknowledgment signal is returned to the calling

station.  Transpond does not function when you are called with a Group code.
Transpond can send an alert tone.

• If Call Alert is programmed, an alert tone will sound when the correct 2-tone code is

received.

1 Press the key programmed as 2-tone Encode to enter 2-tone Encode Select

mode.

2 Press the <B and C> keys to select your desired 2-tone Encode code.

• Your dealer can program up to 10 different 2-tone codes on your transceiver.

3 Use the transceiver the same as in a regular call; press the PTT switch to

transmit and release it to receive.

• The 

 icon appears on the display.

• When you release the PTT switch, the squelch opens.  If no signal is received for a

pre-determined time, the speaker will mute.

• Pressing the key programmed as Monitor at any time will mute the speaker.