JVC KENWOOD Corporation 37663210 用户手册

20

FleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned by
KENWOOD Corporation.  FleetSync enables a variety of paging functions on
your transceiver, some of which depend on dealer programming.

If a GPS unit (NMEA-0183 format) is installed on your transceiver and the Send
GPS function has been programmed onto a key by your dealer, press the Send
GPS key to send your location data.

A Selcall is a voice call to a particular station or to a group of stations.

■ Transmitting

1 Select your desired zone and channel.

2 Press the key programmed as Selcall or Selcall + Status to enter Selcall

mode.

3 Enter the ID of the station you want to call using the microphone keypad.

4 Press the PTT switch and begin your conversation.

■ Receiving

An alert tone will sound, the transceiver will automatically enter Selcall Mode,
and the calling station’s ID will appear when a Selcall is received.

To respond to the call, press the PTT switch and speak into the microphone.

■ Identification Codes

An ID code is a combination of a 3-digit Fleet number and a 4-digit ID
number.  Each transceiver must have its own Fleet and ID number.

• Enter a Fleet number (100 ~ 349) to make a group call.

• Enter an ID number (1000 ~ 4999) to make an individual call in your fleet.

• Enter a Fleet number to make a call to all units in the selected fleet (Interfleet call).

• Enter an ID number to make a call to the selected ID in all fleets (Supervisor call).

• Select “ALL” Fleet and “ALL” ID to make a call to all units (Broadcast call).

Note:  The ID range may be limited by programming.