JVC KENWOOD Corporation 378703 用户手册

9

■

  The   icon will flash and a calling ID or text message will appear when a 

Status call is received.

  Press any key to return to normal operation.

■

1  Press the key programmed as Stack, or press and hold the key 

programmed as 

Selcall, Status, or Selcall + Status to enter Stack mode.

•  The last received message is displayed with the message number.

2  Press the  /  keys to select the desired message.

•  Message types are identified as follows: 

I:  Caller ID 

S:  Status Message 

M:  Short Message

•  You can change the displayed information by pressing and holding the 

 key 

for  second.  The display cycles as follows: 

ID Name > Status/Short Message > CH/GID > Time Stamp > ID Name ...

 3  Press the 

 key to return to normal operation.

•  To delete the selected message, press the 

 key or microphone 

# key.  To 

confirm the deletion, press the 

 key or microphone   key.

•  To delete all messages, press and hold the 

 key or microphone 

# key for  

second.  To confirm the deletion, press the 

 key or microphone   key.

To send a short message, you must connect the transceiver to a PC.  Ask your 

dealer for details.

•  Short messages can contain a maximum of 48 characters.
•  Received short messages are displayed the same as Status messages and are 

stored in the same stack memory.  A combined maximum of 5 Status calls and short 

messages can be stored in the stack memory.

To send and receive long messages, you must connect the transceiver to a PC.  

Ask your dealer for details.

•  Long messages can contain a maximum of 4096 characters.

To send your location data, you must first connect a GPS unit to the transceiver.  

GPS data can be manually transmitted by pressing the key programmed as 

the GPS data, or by accessing the Send the GPS data function through the Menu 

{page 2}.  If set up by your dealer, GPS data may be automatically transmitted at a 

preset time interval.