JVC KENWOOD Corporation 475501 用户手册

13

 

◆ Always switch OFF a transceiver equipped with a battery pack 

before inserting the transceiver into the charger.

1  Plug the AC adapter cable into the jack located on the rear 

of the charger.

2  Plug the AC adapter into an AC outlet.

3  Slide a battery pack or a transceiver equipped with a battery 

pack into the charging slot of the charger.

•  Make sure the metal contacts of the battery pack mate securely 

with the charger terminals.

•  The indicator lights red and charging begins.

Indicator

4  When charging is completed, the indicator lights green.  

Remove the battery pack or the transceiver from the 
charging slot of the charger.

•  It takes approximately 3 hours to charge the battery pack.
•  When the charger will not be used for a long time, unplug the AC 

adapter from the AC outlet.

◆  When the indicator blinks red, the battery pack is either 

defective or the battery pack contacts are not properly mated 
with those of the charger.

◆  When the indicator fl ashes green and orange, the battery pack 

has not satisfi ed the charging start temperature. Remove the 
battery pack from the charger and wait until it reaches a normal 
temperature before charging it again. 

◆  The ambient temperature should be between 41°F and 104°F 

(5°C and 40°C) while charging is in progress.  Charging outside 
this range may not fully charge the battery.