Wi Lan Inc EB02 用户手册
RF Station Configuration
APR 2001 Rev 03
55
12. View the link statistics. From the Main Menu select Link Monitor Display and press
Enter
. The RF
Link Monitor Statistics window is displayed.
13. Check for BER = 0.0E+00 and Corr Power between 15 – 50 dB
.
If the Corr Power is <15 dB the
receive signal is probably too weak. If the power is >55 dB the receiving unit is probably saturated. See
, page 101 for more information about Link Monitor Statistics.
If you have problems, ensure that the unit is configured to its basic default settings (see
, page 99) and reconfigure the unit, or contact Wi-LAN Technical Assistance Center.
14. When finished viewing link monitor statistics, disable Link Monitor to remove the test overhead data
from the RF link. Select RF Station Configuration from the Main Menu and press
Enter
. The RF
Station Configuration menu is displayed.
15. Select Link Monitor Period and press
Enter
. The field is highlighted.
16. Type 0 in the field and press
Enter
. The link monitor test ends.
17. Press
Esc
to exit.
➧
To perform Link Monitor test from a remote unit
1.
Connect the test PC to the Serial port of the remote unit. See
2.
Log in to the unit and go to the Main Menu.
RF Link Monitor Statistics
Link Monitor Rank 1
Base to Remote BER 0.0E+00
Remote to Base BER 0.0E+00
Missed Packet Count 0
Base to Remote Env Power 27
Base to Remote Corr Power 28
Remote to Base Env Power 29
Remote to Base Corr Power 30