Wi Lan Inc EB02 用户手册
Configuration
56
AWE 120-58 Installation & Configuration Guide
3.
Select RF Station Configuration and press
Enter
. The RF Station Configuration menu is
displayed.
4.
Select Operating Mode and press
Enter
. The data field highlights.
5.
Press the arrow keys to select Normal mode and press
Enter
.
6.
Select RF Transmit Status and press
Enter
. The data field highlights.
7.
Press the arrow keys to select unblocked and press
Enter
.
8.
Select Link Monitor Remote Station Rank and press
Enter.
The data field highlights and the
remote automatically connects with the base station.
9.
Select Link Monitor Period and press
Enter
. The data field highlights.
10. Type a link monitor period (1) and press
Enter
. Link Monitor starts as soon as a non-zero value is
entered in the field. (A setting of 1 means that 50% of all data is test data.)
11. View the link statistics. From the Main Menu select Link Monitor Display and press
Enter
. The RF
Link Monitor Statistics window is displayed.
12. Check for BER = 0.0E+00 and Corr Power between 15 – 50 dB
.
If the Corr Power is <15 dB the
receive signal is probably too weak. If the power is >55 dB the receiving unit is probably saturated. See
, page 101 for more information about Link Monitor Statistics.
RF Station Configuration
Operating Mode -> Normal Mode
RF Transmit Status unblocked
Link Monitor Period (0=OFF, 1-10000) 0
Test Mode Timer Minutes (1-1000) 20
Base Station Only Parameters
Maximum Remote Distance 5 Km
Link Monitor Remote Station Rank 1
Remote Station Only Parameters
Throttle Enable off
Throttle Level (1-50) 1
RF Link Monitor Statistics
Link Monitor Rank 1
Base to Remote BER 0.0E+00
Remote to Base BER 0.0E+00
Missed Packet Count 0
Base to Remote Env Power 27
Base to Remote Corr Power 28
Remote to Base Env Power 29
Remote to Base Corr Power 30